Toshiba NB505 User Manual

User’s Manual

6-12

NB500/NB505/NB520/NB525/NB550D/NB555D Series

I cannot use the 

"Sleep and Charge 

function".

Sleep and Charge function may be disabled.
Select the "Enable Sleep and Charge" check box in 

the TOSHIBA Sleep utility to enable this function.
When there is a current overflow of the external 

device connected to the compatible port, USB bus 

power (DC5V) supply may be stopped for safety 

reasons. When this happens, disconnect an 

external device if some external devices are 

connected. After that, turn the power of the 

computer ON/OFF to restore the function. If this 

function can not be still used even if only one 

external device is connected, stop using the 

external device because its current is over the 

acceptable value of this computer. 
Some external devices may not be able to use the 

"Sleep and Charge function". In this case, please try 

one or more of the following methods. 

■

Select another mode.

■

Turn OFF the computer while external devices 

are connected.

■

Connect external devices after turning OFF of 

the computer.

If this function can not be still used, change the 

setting to disable the function and stop using this 

function.

The battery depletes 

quickly even when I 

turned OFF the 

power of the 

computer. 

If Sleep and Charge function is enabled, the 

computer's battery will discharge during hibernation 

or when the computer is turned off.
Connect the AC adaptor to the computer or disable 

the Sleep and Charge function.

External devices 

connected to the 

compatible ports do 

not work when 

connected to a 

compatible port. 

Some external devices may not work when 

connected to a compatible port if the Sleep and 

Charge function is enabled.
Reconnect the external device after turning the 

computer ON.
If the external device still does not work, connect 

device to an USB port that does not have the Sleep 
and Charge function-compatible icon ( ) or change 

to disable the Sleep and Charge function.