Toshiba satellite m100 Service Manual

Page of 51
4  Replacement Procedures 
4.13  Top cover with Display Assembly 
4-50 
  PORTEGE M100 Maintenance Manual (960-452) 
Installing the Top Cover with Display Assembly 
To install the top cover with display assembly, follow the steps below and refer to figures  
4-28to 4-32. 
1.  Be careful to route the wireless LAN antenna coaxial cables so that the display 
assembly will not pinch it.  
2. Seat the top cover with display assembly
3.  Route the Left speaker cable and connect to the connector PJ9511
4. Route the Wireless LAN cables and Bluetooth cable
5. Secure the cables with the tape
 
 
Figure 4-31   Route the Left Speaker cable 
CAUTION:  Be careful to route the cable so that the Top cover will not pinch it. Make 
sure it lies between the two chips. Refer to Figure 4-31.