Toshiba TRST-A10 User Manual
5. INSTALLATION PROCEDURE
5.2 Connecting the Drawer
5-4
EO1-13019
5.2 Connecting the Drawer
1) Turn the printer power OFF.
2) Connect the drawer cable to the drawer interface connector in the correct orientation.
2) Connect the drawer cable to the drawer interface connector in the correct orientation.
[Drawer interface connector] (6-pin modular connector)
A Drawer cable which connects the printer to a drawer is connected to this connector.
To this connector, a TOSHIBA drawer can be connected. Do not connect anything other than the
connectable drawer.
A Drawer cable which connects the printer to a drawer is connected to this connector.
To this connector, a TOSHIBA drawer can be connected. Do not connect anything other than the
connectable drawer.
NOTE: For connectable drawers, refer to your nearest authroized TOSHIBA TEC
representative.
[Ground terminal] (6-pin modular connector)
The drawer interface cable’s ground wire is secured to this terminal.
The drawer interface cable’s ground wire is secured to this terminal.