MiTAC w130 Service Manual
54
7-10 Docking Mother Board
Disassembly Step:
1. Remove ten screws (M2.5L6) that fix the docking bottom cover.
2. Carefully lift up the Docking Bottom cover then disconnected the speaker
1. Remove ten screws (M2.5L6) that fix the docking bottom cover.
2. Carefully lift up the Docking Bottom cover then disconnected the speaker
wire.
3. Remove six screws (M2.5L6) that fix CD-ROM driver and Floppy.
4. Disconnect the CD-ROM and Floppy from the docking Mother Board.
5. Remove three screws (M2.5L6) and seven screws (M2L4) that fix the
4. Disconnect the CD-ROM and Floppy from the docking Mother Board.
5. Remove three screws (M2.5L6) and seven screws (M2L4) that fix the
docking Mother board and docking housing.
Step1 Step2
Step3 Step4
Reassemble Step:
1. Place the docking Mother Board to docking housing and secured three
Reassemble Step:
1. Place the docking Mother Board to docking housing and secured three
screws (M2.5L6) and seven screws(M2L4) to fix the docking Mother
Board
Board
2. Reassemble the CD-ROM and Floppy driver.