packardbell easynote m3 Service Manual
6
Fig. 3: Removing the heat sink cover
5. Disconnect the CPU fan cable.
6. Unscrew the 4 lock screws (C) securing the heat sink.
6. Unscrew the 4 lock screws (C) securing the heat sink.
Note
Loosen the screws one by one a little at the time to avoid too much pressure
on one single corner of the CPU.
7. Take out the heat sink.
Fig. 4: Removing the heat sink
CPU
1. Lift up the lever to release the CPU.
2. Remove the CPU.
2. Remove the CPU.
Fig. 5: Removing the CPU
(A)
(B)
(C)
Packard Bell Easynote M3 Disassembly Manual