packardbell easynote r Service Manual
Packard Bell EasyNote R Series Disassembly Manual
Page 17
Removing the LCD Module
To remove the LCD Module, first remove the Battery (see
Removing the Battery
), remove the
Top Cover (see
Removing the Top Cover
) then perform the following steps:
1. Release LCD hinge cover by release screw on it as shown in below
Fig. 25
Releasing LCD hinge cover
2. Unscrew all screw encircle on Heat Plate as shown in below and carefully separate it from
base unit.
Fig. 26
Removing the Heat Plate
M2x3.5 Black
M2x3 Silver