packardbell easynote e Service Manual

Page of 27
EasyNote E series
Disassembly Manual

Summary of Contents of service manual for packardbell easynote e

  • Page 1: Disassembly Manual EasyNote E series Disassembly Manual
  • Page 2 Table of contents Overview.................................................................................................................................................................3 Technician Notes....................................................................................................................................................3 Disassembly Instructions........................................................................................................................................3 Reassembly Instructions ........................................................................................................................................3 Required Tools .......................................................................................................................................................3 Hazardous Voltage .................................................................................................................................................4 Avoid Electrostatic...
  • Page 3Overview This document contains step-by-steps disassembly instructions for the EasyNote E series chassis. The instructions are illustrated where necessary with...
  • Page 4 WARNING Hazardous Voltage Ensure that the computer is disconnected from There is hazardous voltage present inside the computer its...
  • Page 5Removing the Battery Perform the following steps to remove the battery: 1. Make sure to power off the EasyNote E...
  • Page 6Removing the Hard Disk Drive To remove the hard disk drive, first remove the battery (see Removing the Battery), then...
  • Page 73. Disconnect and lift up the hard disk module as shown in Fig. 4 Fig. 4 Disconnecting the hard disk...
  • Page 8Removing the Memory Module To remove the Memory Module, first remove the battery (see Removing the Battery), then perform the...
  • Page 9Removing the Wireless LAN To remove the Wireless Module, first remove the battery (see Removing the Battery), then perform the...
  • Page 10Removing the CPU To remove the CPU, first remove the battery (see Removing the Battery), then perform the following steps:...
  • Page 115. Unlock CPU from CPU socket and lift up the CPU carefully. Fig. 12 Unlock CPU for EasyNote E2,E4 and...
  • Page 12Fig. 14 Unlock CPU for EasyNote E1 and E3. EasyNote E Series Disassembly Manual Page 12
  • Page 13Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery), then perform the...
  • Page 14Removing the Keyboard To remove the Keyboard, first remove the battery (see Removing the Battery), then perform the following steps:...
  • Page 15 3. Lift up the keyboard and disconnect it from the system as shown in Fig. 18 Fig. 18 Disconnect...
  • Page 162. Disconnect all cable connection located near to left speaker as shown in Fig. 20 Fig. 20 LCD Cable and...
  • Page 174. Flip over unit and release all screws as shown in Fig. 22 A = M6x2.5 Black B = M3x2...
  • Page 187. Unscrew screws all screws shown in Fig. 24 and disconnect right speaker connection on Main board. A = M5x2.5...
  • Page 19Note 1: When lifting up Main Board bewares the coil, attach on the Wireless Antenna. Note 2: Make sure Wireless...
  • Page 20Removing the LCD Module To remove LCD Module first remove Main Board (see Removing Main Board), then perform the following...
  • Page 21Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Module), then...
  • Page 223. Unscrew all screws circled in Fig. 29 and disconnect LCD back light cable from inverter board before lift up...
  • Page 235. Remove the screws at both sides of the wireless antenna as shown in Fig. 31 , release the wires...
  • Page 24Removing the Touch Pad To remove the touch pad, first remove the top cover (see Removing the Top Cover), then...
  • Page 25Removing the Speaker Assembly To remove the Speaker assembly, first open up the Keyboard cover (See Removing Keyboard), Remove Bottom...
  • Page 26Screws M3.5x2 Black M6x2.5 Black M4x3 Silver M10.5x2 Sliver M4.5x3.5 Black M3x2 Sliver M5x2.5 Sliver M6x2 Black M2.5x10 silver M4.5x2.5...
  • Page 27Notice The information in this guide is subject to change without notice. This guide contains information protected by copyright. No...
downloadlike
ArtboardArtboardArtboard
Report Bug