kymco mo yup50 Service Manual

15

. ELECTRICAL EQUIPMENT

15-4

BATTERY

BATTERY REMOVAL
Open the battery cover.

Disconnect the battery cables .

Remove the battery.

The installation sequence is the reverse of

removal

BATTERY CHARGING (OPEN CIRCUIT

VOLTAGE) INSPECTION
Remove the battery cover and disconnect the

battery cables.

Measure the voltage between the battery

terminals.

Fully charged : 13.0V_ 13.2V

Undercharged : 12.3V max.

CHARGING METHOD
Connect the charger positive (+) cable to the

battery positive (+) cable.

Connect the charger negative (-) cable to the

battery negative (-) cable.

Charging current : Standard : 0.4A

Quick

: 4A

Charging time

: Standard : 5 hours

Quick

: 0.5 HOUR

After charging: Open circuit voltage: 12.8V min.

Battery charging inspection must be

performed with an electric tester.

• Quick charging should only be done in

an emergency.

• During quick charging, the battery

temperature should not exceed 45¢J.

• Measure the voltage 30 minutes after

the battery is charged.

•

Keep flames and sparks away

from a charging battery.

•

Turn power ON/OFF at the

charger, not at the battery terminals to

prevent sparks near the battery.

•

Charge the battery according

 

to

the current specified on the battery

surface.

First disconnect the battery negative (-)

cable and then the positive (+) cable.

Battery

Red

Black

Battery