Kawasaki 1600 User Manual
ASSEMBLY 15
Front Footboard (Left)
NOTE
ż
Install the left footboard after the “Clutch Fluid”
section in the Preparation chapter.
section in the Preparation chapter.
•
Install the left footboard assembly on the
frame with one bolt (D = 10, L = 30) at the
rear and tighten it.
frame with one bolt (D = 10, L = 30) at the
rear and tighten it.
A. Front Footboard (Left)
B. Bolt (Rear)
B. Bolt (Rear)
NOTE
ż
The bolt in front is for tightening the footboard
and the front guard together.
and the front guard together.
ż
Tighten the front footboard mounting bolts af-
ter installing the front guards to the specified
torque.
ter installing the front guards to the specified
torque.
Front Guards (Left and Right)
Front Guards Installation
•
Remove the front side mounting bolt from the
front right footboard.
front right footboard.
A. Front Footboard (Right)
B. Bolt
B. Bolt
•
Install both front left and right guards on the
frame with the upper mounting bolts (D = 10,
L = 25), and on the front footboard brackets
with the lower mounting bolts (D = 10, L = 30).
frame with the upper mounting bolts (D = 10,
L = 25), and on the front footboard brackets
with the lower mounting bolts (D = 10, L = 30).
A. Front Guard (Left)
B. Bolt (D = 10, L = 25)
C. Bolt (D = 10, L = 30)
D. Footboard Bracket
B. Bolt (D = 10, L = 25)
C. Bolt (D = 10, L = 30)
D. Footboard Bracket
•
Tighten the front footboard and the guard
mounting bolts to the specified torque.
mounting bolts to the specified torque.
Torque : 34 N·m (3.5 kgf·m, 25 ft·lb)
Label Installation (for US and CN Mod-
els only)
•
Wipe off any oil or grease from the application
area.
area.
•
Peel the warning label off the backing sheet
and stick it on the center of the front left guard.
and stick it on the center of the front left guard.
A. Front Guard (Left)
B. Label For US Models (56070-1285)
C. Label Top
D. Label For CN Models (56070-1180)
B. Label For US Models (56070-1285)
C. Label Top
D. Label For CN Models (56070-1180)