BMW x5 2003 User Manual

114

BMW Universal Transmitter

Programming a hand-held
transmitter with conversion code

Read and comply with the safety
precautions on page

When programming the BMW Universal
Transmitter, consult the instructions for
the specific device.
For using the BMW Universal Trans-
mitter with a conversion-code system,
note the following supplemental
programming instructions:

A second person facilitates
programming of the BMW

Universal Transmitter.

1. Program the BMW Universal Trans-

mitter as described previously under
Programming

2. Press and hold the programming key

on the receiver of the device for
approx. two seconds until the
programming lamp on the device
comes on

3. Press the desired channel key of the

BMW Universal Transmitter three
times.

If you have additional questions,
please consult your BMW Sports

Activity Vehicle center.

Clearing the channel keys

Read and comply with the safety
precautions on page

112

The memory of individual channel keys
cannot be cleared. However, the three
channel keys can be cleared together
as follows:

Press and hold both outside keys of
the BMW Universal Transmitter until
the indicator lamp flashes, and then
release them.

All of the channel keys are cleared.

User information

Do not use this BMW Universal Trans-
mitter with any garage door opener that
lacks safety stop and reverse features
as required by federal safety standards,
this includes any garage door opener
model manufactured before April 1st,
1982.

This device complies with Section 15 of
the FCC Rules. Operation is subject to
the following two conditions: as defined
in the regulations, this device must not
emit harmful interference, and must be
shielded against interference from
external sources to prevent unautho-
rized or inadvertent activation.