BMW x5 2003 User Manual

Page of 183
90
n
The concept 
PDC provides extra safety and conve-
nience during parking maneuvers by pro-
viding an acoustic signal to indicate the 
distance between your front and rear 
bumpers and the nearest object. To do 
this, four ultrasonic sensors in the front 
and rear bumpers each measure the dis-
tance to the nearest object. The detection 
range of the front sensors and the two 
sensors located at the ends of the rear 
bumper is approx. 2 ft/60 cm, while the 
rear center sensors can detect objects to 
a distance of approx. 5 ft/1.50 m.
PDC is a parking aid which regis-
ters objects when approaching 
slowly, as is the case during usual 
parking maneuvers. Avoid approaching 
objects too fast, otherwise the system 
may give warning of physical obstacles 
too late.
<
Automatic function
The system starts to operate automati-
cally approx. one second after you 
select reverse or move the selector 
lever into the R position with the igni-
tion key in position 2. 
Wait for this brief period before 
you start reversing.
<
Manual activation 
Press the button; the indicator lamp 
comes on. 
Manual deactivation
Press the button again; the indicator 
lamp goes out.
Automatic deactivation
After driving a distance of more than 
approx. 160 ft/50 m or exceeding a 
speed of approx. 20 mph/30 km/h, the 
system switches off and the indicator 
lamp goes out. Switch the system on 
again as required. 
530de229
Acoustical signals 
The distance from an object is indicated 
in front with a higher intermittent tone, 
and at the rear with a lower intermittent 
tone. As the distance between vehicle 
and object decreases, the intervals 
between the tones become shorter.
A continuous tone indicates the pres-
ence of an object less than approx. 1 ft/
30 cm away. 
The warning signal is canceled after 
approx. 3 seconds if you are moving 
parallel to a wall. 
If there is a malfunction of the system:
The indicator lamp flashes and a short 
steady signal tone is sounded 
>
if you activate PDC with the button 
>
when you select reverse for the first 
time after switching on the ignition 
>
if a malfunction occurs while the PDC 
system is active.
Switch the system off and have the 
cause of the malfunction corrected by 
your BMW Sports Activity Vehicle 
center. 
Park Distance Control PDC
Online Edition for Part No. 01 41 0 157 098 - © 08/02 BMW AG