BMW serie 3 sedan 2000 User Manual
150
n
Changing a wheel
>
Spare tire
*
or space-saver spare tire
*
Located next to the jack.
Loosen the wing nut (arrow) by hand,
remove the storage tray and take out
the spare wheel.
Loosen the wing nut (arrow) by hand,
remove the storage tray and take out
the spare wheel.
>
Lug wrench – is in the onboard tool
kit on the underside of the luggage
compartment lid (refer to page
kit on the underside of the luggage
compartment lid (refer to page
).
460de059
Procedure
1 Read and comply with the safety
precautions provided on the previ-
ous page.
ous page.
2 Secure the vehicle from rolling:
Place the wedge against the rear
surface of the front tire on the side
opposite the side being raised. If
the vehicle is parked on a down-
ward slope, place the wedge se-
curely in front of the tire. If the
wheel must be changed on a sur-
face with a more severe slope, take
additional precautions to secure the
vehicle from rolling.
surface of the front tire on the side
opposite the side being raised. If
the vehicle is parked on a down-
ward slope, place the wedge se-
curely in front of the tire. If the
wheel must be changed on a sur-
face with a more severe slope, take
additional precautions to secure the
vehicle from rolling.
3 If your wheels are equipped with full
wheel covers
*
: Reach into the ven-
tilation openings and pull the cover
off.
off.
460de124
4 Loosen the lug bolts 1/2 turn.
5 Position the jack at the jacking point
5 Position the jack at the jacking point
closest to the flat tire (refer to the
center illustration) so that the jack
base is vertically below the jacking
point and the entire surface of the
head of the jack will move into the
square recess of the jacking point
(refer to the illustration detail) when
the jack is cranked.
center illustration) so that the jack
base is vertically below the jacking
point and the entire surface of the
head of the jack will move into the
square recess of the jacking point
(refer to the illustration detail) when
the jack is cranked.
6 Jack the car up until the wheel you
are changing is raised from the
ground.
ground.
7 Unscrew the lug bolts and remove
the wheel.
8 Remove accumulations of mud or
dirt from the mounting surfaces of
the wheel and hub; clean the lug
bolts.
the wheel and hub; clean the lug
bolts.
460de190
Online Edition for Part No. 01 41 0 155 024 - © 07/99 BMW AG