Yamaha AV Receiver User Manual

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, 
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be 
unnatural and lack bass.

• Before connecting the speakers, make sure that this unit is set to the standby mode (see page 27).
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this 

ΩMIN” before using this unit 

(see page 26).

• A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a 

stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the 
plain cable to the “–” (black) terminals.

• The low-frequency signals of other speakers set to “SML” (or “SMALL”) or to “NONE” in “SPEAKER SET” (see pages 78 and 79) 

are directed to the speakers selected in “LFE/BASS OUT” (see page 79).