Yamaha AV Receiver User Manual

Page of 116
34
USING AUDIO FEATURES
y
“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are 
stored independently.
• You cannot use the night listening modes in the following 
cases:
– when the “DIRECT STEREO” mode (see page 38) is 
selected.
– when the component connected to the MULTI CH 
INPUT jacks is selected as the input source (see 
page 37)
.
– when headphones are connected to the PHONES jack.
• The night listening modes may vary in effectiveness 
depending on the input source and surround sound settings 
you use.
This unit comes with a variety of input jacks. Do the 
following to select the type of input signals you want to 
use.
y
• We recommend setting “INPUT MODE” to “AUTO” in most 
cases.
• You can adjust the default input mode of this unit by using the 
“INPUT MODE” parameter in “INPUT MENU” (see page 84).
• To play DTS-encoded CDs when using a digital audio 
connection, be sure to set “INPUT MODE” to “DTS”.
• DTS decoding may not be performed correctly depending on 
the player even if you make a digital connection between this 
unit and the player.
1
Rotate the INPUT selector on the front panel 
to select the desired input source.
2
Press INPUT MODE on the front panel 
repeatedly to select the desired input mode.
AUTO
Automatically selects input signals in 
the following order:
(1) Digital signals
(2) Analog signals
DTS
Selects only digital signals encoded in 
DTS. If no DTS signals are input, no 
sound is output.
ANALOG
Selects only analog signals. If no 
analog signals are input, no sound is 
output.
When “INPUT MODE” is set to “AUTO”, this unit 
automatically switches to the appropriate decoder if a Dolby 
Digital or DTS signal is detected.
Use this feature to automatically set this unit to the 
standby mode after a certain amount of time. The sleep 
timer is useful when you are going to sleep while this unit 
is playing or recording a source. The sleep timer also 
automatically turns off any external components 
connected to AC OUTLET(S) (see page 25).
1
Press one of the input selector buttons on 
the remote control to select the desired input 
source.
2
Start playback on the selected source 
component or select a broadcast station.
Refer to the operating instructions for the source 
component.
See page 45 for details about tuning instructions.
Notes
Selecting the input mode
Notes
INPUT
INPUT MODE
DVR
pDVD
CD
XM
V-AUX
DTV/CBL
MD/CD-R
TUNER
VOLUME
SP
dB
L
R
D V D
A U T O
Currently selected
input source
Currently selected 
input mode
Available input sources
Note
Using the sleep timer
CD
MULTI CH IN
SLEEP
CD-R
XM
DVD
DTV
MD
CBL
TUNER
V-AUX
DVR