Yamaha AV Receiver User Manual

You can enjoy good quality sound with the initial factory 
settings. Although you do not have to change the initial 
factory settings, you can change some of the parameters to 
better suit the input source or your listening room.

• Use the “PARAM. INI” feature in “OPTION MENU” to 

initialize the parameters of each sound field program within a 
sound field program group (see page 86).

• When you set a sound field parameter to a value other than the 

initial factory settings, an asterisk mark (*) appears by the 
sound field parameter name in the OSD.

• You cannot change the sound field parameter values when 

“MEMORY GUARD” in “OPTION MENU” is set to “ON” 
(see page 86). If you want to change the sound field parameter 
values, set “MEMORY GUARD” to “OFF”.

y

• For details about the function and control range of each sound 

field parameter, see page 67.

• Repeat steps 3 and 4 as necessary to change other sound field 

program parameter settings.

• The available sound field parameters for some of the sound field 

programs may be displayed on more than one page in the OSD. 
In this case, press u / d to scroll through pages.

• If you press and hold j / i to change the sound field parameter 

value, the initial factory settings are shown momentarily in the 
front panel display.

Turn on the video monitor and then press 
DISPLAY on the remote control.
The following display is shown in the OSD.

Press u / d to select the desired sound field 
parameter and then j / i to change the 
selected sound field parameter value.
• Press i to increase the value.
• Press j to decrease the value.

P02

MUSIC

.

Pop/Rock

DSP LEVEL

;;;;0dB

P.INIT.DLY

;;21ms

P.ROOM SIZE

;;1.0

S.INIT.DLY

;;25ms

S.ROOM SIZE

;;1.0