Yamaha AV Receiver User Manual

■ Volume Trim  D)VOLUME TRIM
Use this feature to adjust the level of the signal input at 
each jack. This is useful if you want to balance the level of 
each input source to avoid sudden changes in volume 
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, 

V-AUX, DVR

Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB

Use this menu to adjust the optional system parameters.

■ Display settings  A)DISPLAY SET

  DIMMER

Use this feature to adjust the brightness of the front panel 
display.
Control range: –

 

4 to 0

Control step: 1
• Press j to make the front panel display dimmer.
• Press i to make the front panel display brighter.

  VIDEO CONV.

Use this feature to set whether to convert the video signals 
input at the VIDEO and S VIDEO jacks.
Choices: ON, OFF
• Select “ON” to convert composite and S-video signals 

interchangeably and up-convert composite and S-video 
signals to component video signals.

• Select “OFF” not to convert any signals.

• The converted video signals are only output at the MONITOR 

OUT jacks. When recording a video source, you must make the 
same type of video connections between each component.

• When composite video or S-video signals from a VCR are 

converted to component video signals, the picture quality may 
suffer depending on your VCR.

• You must set “VIDEO CONV.” to “ON” to display the OSD.
• Unconventional signals input at the composite video or S-video 

jacks cannot be converted or may be output abnormally. In such 
cases, set “VIDEO CONV.” to “OFF”.

DVD->0.0dB   

[<]/[>]:Adjust
[RETURN]:Exit

D)VOLUME TRIM

.A)DISPLAYSET

B)MEMORYGUARD
C)PARAM.INI
D)MULTI ZONESET

[]/[]:Up/Down
[ENTER]:Enter

3

OPTION

MENU 1/2

p

p

.E)XM RADIO SET

[]/[]:Up/Down
[ENTER]:Enter

3

OPTION

MENU 2/2

p

p

.DIMMER;;;;;;;;;0

VIDEOCONV.

;;;ON

OSD 

 

 

 

 

 

 

 

 

 

 

 

SHIFT

;;;;;;0

  GRAY 

BACK

;;;AUTO

[]/[]:Up/Down
[<]/[>]:Adjust

A)DISPLAY

SET

p

p