Yamaha AV Receiver User Manual

■ Setting remote control XM ID library 

Select one of the following codes to set the remote control 
XM ID library code for the component you want to use.

Press CODE SET using a ballpoint pen or a 
similar object.
The TRANSMIT indicator on the remote control 
flashes twice.

Press the numeric buttons to enter the code 
number “81918” or “81919”.
The TRANSMIT indicator on the remote control 
flashes twice, and the XM ID library code is changed.

*1

The remote control setting

*2

The setting of this unit (see page 89)

• You need to set the corresponding remote control XM ID 

of this unit in the advanced setup (see page 89).

• When using multiple YAMAHA receivers/amplifiers, you 

may be able to operate the other components 
simultaneously with the default code setting. In this case, 
set one of the alternative codes to operate this unit 
separately.

Use this feature to clear all the remote control codes 
previously set and reset all of them to the initial factory 
settings.

Press CODE SET using a ballpoint pen or a 
similar object.
The TRANSMIT indicator on the remote control 
flashes twice.

Press the numeric buttons to enter the code 
number “9981”.
The TRANSMIT indicator on the remote control 
flashes twice, and all the remote control codes 
previously set are cleared and reset to the initial 
factory settings.

y

If you do not press any buttons within 30 seconds after step 
2, the clearing process is canceled. In this case, repeat the 
clearing procedure.

81918

(initial setting)

To operate this unit using 
the default code.

ID1 

(initial setting)

81919

To operate this unit using 
an alternative code.

ID2