Yamaha 9000 pro User Manual
Installing Optional Hardware
Installing Optional Hardware
Reference
181
Optional Plug-in Board Installation
A variety of optional Plug-in boards sold separately let you expand the voice library of
your instrument. The following types of Plug-in boards can be used with your instrument.
your instrument. The following types of Plug-in boards can be used with your instrument.
• PLG150-AN
• PLG150-PF
• PLG100-VL
• PLG150-VL
• PLG100-DX
• PLG150-DX
• PLG100-XG
1
Turn the 9000Pro power off, and disconnect the AC power
cord. Also, if the keyboard is connected with other external
device(s), disconnect the device(s).
cord. Also, if the keyboard is connected with other external
device(s), disconnect the device(s).
2
Turn the 9000Pro face down on a blanket or some soft sur-
face, giving you direct access to the bottom of the instru-
ment.
face, giving you direct access to the bottom of the instru-
ment.
3
Move to a position facing the front panel of the keyboard,
and remove the eight screws from the Plug-in board/Hard
disk cover with a Phillips screwdriver. Do not remove the
other screws.
and remove the eight screws from the Plug-in board/Hard
disk cover with a Phillips screwdriver. Do not remove the
other screws.
4
Remove the Plug-in board/Hard disk cover.
CAUTION
• When inserting Plug-in boards and connecting cables, make sure that you check that they are inserted and
connected properly. Improperly inserted Plug-in boards and cables may cause faulty contacts and an electri-
cal short circuit which may cause damage or result in a malfunction.
cal short circuit which may cause damage or result in a malfunction.
• After mounting the Plug-in board, be sure to tighten the screws as directed so it is completely stable and
does not move in any way.
Plug-in board/Hard disk cover
Black screws
Plug-in board/Hard disk cover
• Keep the removed (8) screws
in a safe place. They will be
used when attaching the Plug-
in board/Hard disk cover to the
keyboard again.
used when attaching the Plug-
in board/Hard disk cover to the
keyboard again.
WARNING
• In order not to drop any screws inside the 9000Pro, keep the Plug-in Board and cover away from the 9000Pro
in the following steps #5 - #7.
179