Kawasaki ninja er-6f abs User Manual
PREPARATION 11
A. Seat
B. Seat Lock
C. Ignition Key
D. Insert
•
Turn the key clockwise while pulling the rear
end of the seat.
end of the seat.
•
Remove the seat backward.
•
Run the suitable band into the positive termi-
nal (+).
nal (+).
•
Pull the battery out of the battery case with
both hands.
both hands.
A. Battery
B. Suitable Band
•
Clean the terminals.
Battery Specifications
Make
Furukawa
Battery Type
FTX12-BS
Battery Capacity
12 V 10 Ah
Electrolyte Capacity
0.60 L
Battery/Electrolyte Set P/No.
26012-0109
Battery Activation
Filling the Battery with Electrolyte
Filling the Battery with Electrolyte
CAUTION
Do not remove the aluminum sealing
sheet [A] from the filler ports [B] until
just prior to use. Be sure to use the ded-
icated electrolyte container for correct
electrolyte volume.
sheet [A] from the filler ports [B] until
just prior to use. Be sure to use the ded-
icated electrolyte container for correct
electrolyte volume.
•
Place the battery on a level surface.
•
Check to see that the sealing sheet [A] has no
peeling, tears, or holes in it.
peeling, tears, or holes in it.
•
Remove the sealing sheet [A].
NOTE
The battery is vacuum sealed. If the sealing
sheet has leaked air into the battery, it may
require a longer initial charge.
sheet has leaked air into the battery, it may
require a longer initial charge.
•
Remove the electrolyte container from the
vinyl bag.
vinyl bag.
•
Detach the strip of caps [A] from the container
and set aside, these will be used later to seal
the battery.
and set aside, these will be used later to seal
the battery.
NOTE
Do not pierce or otherwise open the sealed
cells [B] of the electrolyte container. Do not
attempt to separate individual cells.
cells [B] of the electrolyte container. Do not
attempt to separate individual cells.