Yamaha b1d User Manual
15
After connection and setup is finished, try to play your bass guitar.
Controller and Switch
● Play a synth sound only
•
Set the output select switch to the SYNTH
position
position
•
Use the VOL knob to control the synth
volume. Turn the knob right to increase the
volume and left to decrease.
volume. Turn the knob right to increase the
volume and left to decrease.
•
The UP/DOWN buttons can be used to select
different synthesizer voices and other func-
tions on the Guitar MIDI Converter.
If you are using the G50, you can increase or
decrease, by a value of one, Program Memory
Numbers, Parameter Values, Program Num-
bers, and Octave Shift Values.
Refer to the Guitar MIDI Converter manual
for more information.
different synthesizer voices and other func-
tions on the Guitar MIDI Converter.
If you are using the G50, you can increase or
decrease, by a value of one, Program Memory
Numbers, Parameter Values, Program Num-
bers, and Octave Shift Values.
Refer to the Guitar MIDI Converter manual
for more information.
● Play the Bass Guitar sound only.
•
Set the output select switch to the BASS
position.
position.
•
The bass direct signal volume will not change
even if the VOL knob is turned.
even if the VOL knob is turned.
● Play the Bass Guitar and Synth sounds
together.
•
Set the output select switch to the MIX
position.
position.
•
Turning the VOL knob changes the synthesizer
volume only. The bass guitar’s volume will not
change.
volume only. The bass guitar’s volume will not
change.
•
The UP/DOWN buttons function is identical to
that described in the “Play a synth sound only”
section above.
that described in the “Play a synth sound only”
section above.
Volume Control
Memory or Parameter,
etc., switch
etc., switch