Yamaha aw16g User Manual

Track editing

124

Here is the basic procedure for using a track editing 
command. The procedure is essentially the same for all 
track editing commands.

■ Select the editing command

In the Work Navigate section, repeatedly 
press the [EDIT] key.

The EDIT screen will appear. This screen displays 
the following information.

1

Indicates the currently selected editing command.

B

Indicates the approximate location of the currently 
set locate points and markers.
If the current track is selected as the virtual track to 
be edited, the approximate range(s) of recorded 
data will also be displayed.

C

Sets various parameters (track/virtual track number, 
editing region, etc.) required in order to execute the 
command. The type of parameters and the ranges of 
the settings will depend on the command that is 
selected.

D

Move the cursor to this button and press the 
[ENTER] key to execute the editing command.

Repeatedly press the [EDIT] key or hold down 
the [EDIT] key and use the CURSOR [

]/[

] 

keys to select the desired editing command.

The EDIT screen is divided into pages for each edit-
ing command. For example, a screen like the one 
shown below will appear if you choose the ERASE 
command.

■ Select the track(s) to edit

After you choose an editing command, the next step is to 
specify the track(s) that will be edited.

To select the track for editing, move the cur-
sor to the TR (Track) field in the lower left of 
the EDIT screen, and turn the [DATA/JOG] 
dial.

For any command, the TR (Track) field will appear 
in the lower left of the screen, allowing you to 
select the track(s).

In the TR field you can select the following types of 
data.

CLIP............................Sound clip
1–16 ...........................An audio track
1/2–15/16 ..................A pair of adjacent odd-numbered/

even-numbered audio tracks

STEREO ......................The stereo track
PAD ............................A pad track
ALL .............................Audio tracks 1–16 and pad tracks 

1–4

SMPL ..........................All samples of the quick loop sam-

pler

Select the virtual track or pad that you want 
to edit.

If you selected an audio track (1–16,1/2–15/16, 
STEREO) in step 3, the V (V.TRACK) field will 
appear at the right, allowing you to select the virtual 
track number. Move the cursor to this field and 
select a virtual track number 1–8.

If you selected PAD in step 3, a field allowing you 
to select pad number will appear at the right. Move 
the cursor to this field and select a number 1–4.

4

3

1

2

Track number

Virtual track number

Pad number