Yamaha arius ydp-140 User Manual

(1)B-12/(3)-11

YDP-160/140

   Owner’s Manual

* Please keep this manual in a safe place for future reference.

• Only use the voltage specified as correct for the instrument. The required 

voltage is printed on the name plate of the instrument.

• Check the electric plug periodically and remove any dirt or dust which may have 

accumulated on it.

• Use only the supplied power cord/plug.

• Do not place the power cord near heat sources such as heaters or radiators, and 

do not excessively bend or otherwise damage the cord, place heavy objects on 
it, or place it in a position where anyone could walk on, trip over, or roll anything 
over it.

• (Users within Canada or U.S.) Use the specified adaptor (PA-150 or an 

equivalent recommended by Yamaha) only. Using the wrong adaptor can result 
in damage to the instrument or overheating.

• (Others) Use the specified adaptor (PA-5D or an equivalent recommended by 

Yamaha) only. Using the wrong adaptor can result in damage to the instrument 
or overheating.

• Do not place the AC adaptor cord near heat sources such as heaters or radiators, 

and do not excessively bend or otherwise damage the cord, place heavy objects 
on it, or place it in a position where anyone could walk on, trip over, or roll 
anything over it.

• Do not open the instrument or attempt to disassemble the internal parts or 

modify them in any way. The instrument contains no user-serviceable parts. If it 
should appear to be malfunctioning, discontinue use immediately and have it 
inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet 

conditions, or place containers on it containing liquids which might spill into 
any openings. If any liquid such as water seeps into the instrument, turn off the 
power immediately and unplug the power cord from the AC outlet. Then have 
the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. 

A burning item may fall over and cause a fire.

• If the power cord (YDP-160)/AC adaptor cord (YDP-140) or plug becomes 

frayed or damaged, or if there is a sudden loss of sound during use of the 
instrument, or if any unusual smells or smoke should appear to be caused by it, 
immediately turn off the power switch, disconnect the electric plug from the 
outlet, and have the instrument inspected by qualified Yamaha service 
personnel.

• When removing the electric plug from the instrument or an outlet, always hold 

the plug itself and not the cord. Pulling by the cord can damage it.

• (YDP-160) Remove the electric plug from the outlet when the instrument is not 

to be used for extended periods of time, or during electrical storms.

• (YDP-140) Unplug the AC power adaptor when not using the instrument, or 

during electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector. 

Doing so can result in lower sound quality, or possibly cause overheating in the 
outlet.

• Read carefully the attached documentation explaining the assembly process. 

Failure to assemble the instrument in the proper sequence might result in 
damage to the instrument or even injury. 

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or 

heat (such as in direct sunlight, near a heater, or in a car during the day) to 
prevent the possibility of panel disfiguration or damage to the internal 
components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, 

mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio 
may generate noise.

• Do not place the instrument in an unstable position where it might accidentally 

fall over.

• (YDP-160) Before moving the instrument, remove all connected cables.

• (YDP-140) Before moving the instrument, remove all connected adaptor and 

other cables.

2