Yamaha cd-r1000 User Manual

Page of 67
Troubleshooting
53
CDR1000—Owner’s Manual
The SRC indicator lights up while 
recording.
The SRC indicator lights up when the SRC (Sampling Rate Converter) is 
active. See “Setting the Sampling Rate Converter” on page 26 for more 
information.
Sync Recording does not start 
automatically when recording 
from CD or MD.
CD and MD players must be stopped or paused, as Sync Recording 
cannot be started while the source device is playing. See “Sync Record-
ing from CD, MD, or DAT” on page 39 for more information.
Using One-track Sync Recording, 
recording stops before the end of 
the track when recording from a 
DAT tape.
Recording stops when the CDR1000 receives a Track Number, Start ID, 
or Skip ID. Make sure that there isn’t a Skip ID in the middle of the track 
being recorded. See “Sync Recording from CD, MD, or DAT” on page 
39 for more information.
Using Sync Recording, the top of a 
track is cut off when recording 
from a DAT tape.
Make sure that the DAT Start IDs are positioned slightly before the start 
of each track. See “Sync Recording from CD, MD, or DAT” on page 39 
for more information.
Sync Recording stops 
unexpectedly.
If no input signal is received for 20 or more seconds, Sync Recording 
stops automatically. See “Sync Recording from CD, MD, or DAT” on 
page 39 for more information.
Symptom
Advice