Yamaha clavinova c l p - 3 8 0 User Manual
Recording Your Performance
CLP-380 Owner’s Manual
32
Basic Operation
Procedure
1.
Select “NewSong” for recording.
Press the [REC] and [STOP] buttons simultaneously.
2.
Select a voice.
Select a voice (or voices) for recording (see page 23).
Set the other parameters, such as reverb, chorus and Song Balance.
Adjust the [MASTER VOLUME] dial to set the volume level to suit your
preference. You can also use the dial to adjust the level during playback.
After you set the tempo or if the record standby screen does not appear, press the
[SONG SELECT] button once to return to the “NewSong” screen.
Adjust the [MASTER VOLUME] dial to set the volume level to suit your
preference. You can also use the dial to adjust the level during playback.
After you set the tempo or if the record standby screen does not appear, press the
[SONG SELECT] button once to return to the “NewSong” screen.
3.
Engage the record mode.
Press the [REC] button.
The [REC] and [RIGHT] indicators flash in red.
(To stop recording, press the [REC] button again or press the [STOP] button.)
(To stop recording, press the [REC] button again or press the [STOP] button.)
Set the tempo, if necessary.
If this record standby screen does not appear, press the [SONG SELECT] button
once.
If this record standby screen does not appear, press the [SONG SELECT] button
once.
Recording a performance without specifying the recording part
1 3
2
4 5
B
D
NO
YES
A
C
------------- BAR 001
-----:NewSong
-----:NewSong
“NewSong” screen
If you select a song other than
“-----:NewSong” and record on a
part that already has data, the
existing data on the part will be lost.
“-----:NewSong” and record on a
part that already has data, the
existing data on the part will be lost.
TIP
Set the tempo in Step 3.
See page 38 for more information
on recording in Dual/Split mode.
on recording in Dual/Split mode.
TIP
TIP
B
D
NO
YES
A
C
SongRecording BAR 001
-----:NewSong
-----:NewSong
Record standby screen