Yamaha clavinova c l p - 3 8 0 User Manual

CLP-380 Owner’s Manual

122

This instrument features a built-in USB [TO DEVICE] terminal. When connecting a USB device to the terminal, be sure 
to handle the USB device with care. Follow the important precautions below.

n For more information about the handling of USB devices, refer to the owner’s manual of the USB device.

• USB storage devices (flash memory, floppy disk drive, 

hard disk drive, etc.)

• USB hub
• USB-LAN adaptor

The instrument does not necessarily support all 
commercially available USB devices. Yamaha cannot 
guarantee operation of USB devices that you purchase. 
Before purchasing a USB device for use with this 
instrument, please visit the following web page: 
http://music.yamaha.com/download/

n Other USB devices such as a computer keyboard or 

mouse cannot be used.

• When connecting a USB device to the USB [TO 

DEVICE] terminal, make sure that the connector on 
the device is appropriate and that it is connected in the 
proper direction.

When connecting a USB device to the USB [TO DEVICE] 
terminal on the top panel, remove it before closing the key 
cover. If the key cover is closed with the USB device 
connected, the USB device may be damaged.

• If you intend to connect two or three devices at the 

same time to a terminal, you should use a USB hub 
device. The USB hub must be self-powered (with its 
own power source) and the power must be on. Only 
one USB hub can be used. If an error message appears 
while using the USB hub, disconnect the hub from the 
instrument, then turn on the power of the instrument 
and re-connect the USB hub.

• Though the instrument supports the USB 1.1 standard, 

you can connect and use a USB 2.0 storage device with 
the instrument. However, note that the transfer speed is 
that of USB 1.1.