Yamaha D5000 User Manual

BYPASS or PROGRAM INC/DEC Footswitch Jack – The function of this jack is determined by 
the FOOT SW FUNCTION parameter of the UTILITY Mode.
If it is set to 

BYPASS

, the footswitch duplicates the function of the 

[BYPASS] key.

If it is set to 

PROGRAM

, the footswitch allows you to select between a pre-determined range of 

program numbers.

TRIGGER Footswitch Jack – A footswitch connected to this jack duplicates the function of the 

[TRIGGER] key.

MIDI OUT/THRU Switch – This switch selects either MIDI THRU or MIDI OUT for the MIDI 
OUT/THRU connector.

MIDI OUT/THRU Connector – When the MIDI OUT/THRU switch (3 above) is set to OUT, 
data originated by the D5000 is transmitted to an external MIDI device.
When the switch is set to THRU, the connector just retransmits data received at the MIDI IN 
connector.

MIDI IN Connector – This connector receives data from an external MIDI device.

OUTPUT L/R Connectors – These are the analog stereo outputs from the D5000. Both the XLR-
type connectors and the TRS phone jacks are electrically balanced output connectors.

INPUT L/R Connectors – These are the analog stereo inputs to the D5000. Both the XLR-type 
connectors and the TRS phone jacks are electrically balanced input connectors.
Use the "L" (left-channel) connector when you are using a monophonic sound source. Set the 
input mode for the source with the 

INPUT MODE

 parameter for delay programs (see page 11) 

or the 

TRACK

 parameter for sampler programs (see page 16 and page 20).

Level switches – Both the input and output connectors may be set to nominal levels of +4 dB or 
-20 dB. When connecting the D5000 to other equipment, refer to the specifications of the other 
units in order to match the signal levels correctly.

BYPASS
PROGRAM
INC/DEC

TRIGGER

FOOT SW

MIDI

THRU OUT

IN

R

L

OUTPUT

INPUT

R

L

20dB

+4dB

R

L

R

L

-20dB +4dB

1

6

2 3 4

5

8

8

7