Yamaha digital mixing studio 01x User Manual
Before Using
Basics Section
Appendix
Getting Started
Reference
01X Owner’s Manual
137
Parameter Lists
● ST REVERB
Two input, two output stereo reverb.
● M.BAND DYNA.
Two input, two output 3-band dynamics processor, with individual solo and gain reduction metering for each band. (The meter
function is for Studio Manager only.)
function is for Studio Manager only.)
*1. 6ms – 46.0s (fs=44.1kHz), 5ms – 42.3s (fs=48kHz), 3ms – 23.0s (fs=88.2kHz), 3ms – 21.1s (fs=96kHz)
Parameter
Range
Description
REV TIME
0.3–99.0 s
Reverb time
REV TYPE
Hall, Room, Stage, Plate
Reverb type
INI. DLY
0.0–100.0 ms
Initial delay before reverb begins
HI. RATIO
0.1–1.0
High-frequency reverb time ratio
LO. RATIO
0.1–2.4
Low-frequency reverb time ratio
DIFF.
0–10
Reverb diffusion (left–right reverb spread)
DENSITY
0–100%
Reverb density
E/R BAL.
0–100%
Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections)
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
Parameter
Range
Description
LOW GAIN
–96.0 to +12.0 dB
Low band level
MID GAIN
–96.0 to +12.0 dB
Mid band level
HI. GAIN
–96.0 to +12.0 dB
High band level
PRESENCE
–10 to +10
For positive values, the threshold of the high band is lowered and the threshold of the low band is increased. For
negative values, the opposite will occur. When set to 0, all three bands are affected the same.
negative values, the opposite will occur. When set to 0, all three bands are affected the same.
CMP. THRE
24.0 to 0.0 dB
Compressor threshold
CMP. RAT
1:1 to 20:1
Compressor ratio
CMP. ATK
0–120 ms
Compressor attack
CMP. REL
*1
Compressor release time
CMP. KNEE
0–5
Compressor knee
LOOKUP
0.0–100.0 ms
Lookup delay
CMP. BYP
OFF, ON
Compressor bypass
L-M XOVR
21.2 Hz–8.00 kHz
Low/mid crossover frequency
M-H XOVR
21.2 Hz–8.00 kHz
Mid/high crossover frequency
SLOPE
–6 to –12 dB
Filter slope
CEILING
–6.0 to 0.0 dB, OFF
Specifies the maximum output level
EXP. THRE
–54.0 to –24.0 dB
Expander threshold
EXP. RAT
1:1 to
∞
:1
Expander ratio
EXP. REL
*1
Expander release time
EXP. BYP
OFF, ON
Expander bypass
LIM. THRE
–12.0 to 0.0 dB
Limiter threshold
LIM. ATK
0–120 ms
Limiter attack
LIM. REL
*1
Limiter release time
LIM. BYP
OFF, ON
Limiter bypass
LIM. KNEE
0–5
Limiter knee
SOLO LOW
OFF, ON
If this is on, only the low-frequency band will be output.
SOLO MID
OFF, ON
If this is on, only the mid-frequency band will be output.
SOLO HIGH
OFF, ON
If this is on, only the high-frequency band will be output.