Yamaha digital mixing studio 01x User Manual

01X   Owner’s Manual

The mLAN MIDI ports 1, 4 and 5 are used to communicate 
via MIDI with the 01X.  The mLAN MIDI ports 2 and 3 are 
connected directly to the MIDI-A and MIDI-B terminals of the 
01X and do not communicate via MIDI with the 01X.

MIDI is used with the 01X for the following purposes/pro-
grams.

• Studio Manager
• Controlling the DAW software
• Controlling the Multi Part Editor
• Recalling preset Library Scenes 

(via program change messages)

The port-related functions are assigned to specific ports as 
indicated in the chart below.

The MIDI format to be used for each function is shown 
below.  The explanations here pertain only to changing 01X 
Scenes via the mLAN MIDI Port 5.

3.2 System Common Messages
No relevant messages.

3.4 System Exclusive Messages
No relevant messages.

4.1 Program Change
These messages are effective only when the SHIFT + 
REMOTE function is set to “NO ASSIGN” (SCENE CTL).

< Receiving >
Data is received when PROGRAM CHANGE RX is on and 
the receive channel settings match.  However, when OMNI 
is set to on, reception is enabled regardless of the channel 
settings.  Upon reception, Library Scenes are recalled 
according to the settings of the Program Change Assign 
Table.

< Transmitting >
When PROGRAM CHANGE TX is on, recalling a Library 
Scene transmits data via the set transmit channel, accord-
ing to the settings of the Program Change Assign Table.

STATUS

1100nnnn

Cn

Program change

DATA

0nnnnnnn

nn

Program number (0-127)

4.2 Active Sensing (FE)
< Receiving >
If no Active Sensing messages are received within 400 ms, 
MIDI communications are initialized, such as clearing the 
Running Status.

STATUS

11111110

FE

Active sensing

4.3 System Reset (FF)
< Receiving >
Upon reception, this initializes MIDI communications, such 
as clearing the Running Status.

STATUS

11111111

FF

System reset

mLAN MIDI Port

Function

mLAN-MIDI-1

Remote control (Mode can be selected.)

mLAN-MIDI-2

Direct connection to MIDI-A terminal

mLAN-MIDI-3

Direct connection to MIDI-B terminal

mLAN-MIDI-4

Studio Manager

mLAN-MIDI-5

Remote control (Mode is fixed to “GENERAL.”  This 
is used for control of the Multi Part Editor, or for 
recalling Library Scenes by program change mes-
sages.  Selection between the two is done from the 
Utility menu.)

Function

Format

Remote Control

GENERAL

01X Remote General format

LOGIC

Special format

CUBASE

Special format

SONAR

Special format

DIGITAL 
PERFORMER

Special format

Studio Manager

Special format

Recalling of Library Scenes

Program Change messages

Command

rx/tx

function

Cn PROGRAM CHANGE

rx/tx

For switching the Library Scene 
memory

Command

rx/tx

function

FE ACTIVE SENSING

rx

For checking MIDI cable connec-
tion

FF RESET

rx

Clear the running status