Yamaha digital mixing studio 01x User Manual

01X Owner’s Manual

Mixing Tutorial

Before Using

Basics Section

Appendix

Getting Started

Reference

e Press the [SEND] button (several times, if necessary) to

call up the AUX 3 display below.

r Go back to the input channels—press the MIXER/

LAYER [1-8] button.

t Adjust the send level for the desired channel with the

corresponding channel knob.

While you’re adjusting this, listen to the change in the

sound. If you need to, go back to steps 2 and 3 above

and adjust the Return level to an appropriate value.

Remember that you can also select the other channels

(mLAN inputs 9 - 16, and 17 - 24) by pressing the

appropriate button in the MIXER/LAYER section.

(For more about the mLAN inputs, see page 28.)

• For step 5, try pressing the [FLIP] button and using the faders to

adjust the send levels instead of the knobs. (See page 19.)

• If you have little experience in mixing and using effects, you

should keep in mind that the settings you make in each section

above are interrelated—especially the Mix, Aux Return and

Channel Send levels. If any of these are set to –

∞

, you may not

hear any effect sound.

AUX3 SEND LEVEL

-oo

AUX3 SEND LEVEL

-78.0

-68.0

-40.0

-76.0

-oo