Yamaha digital mixing studio 01x User Manual

01X   Owner’s Manual

● Recording audio 

In this section, you’ll learn how to record an audio input 
signal from the 01X to the computer.

Connect the instrument or microphone to the 01X 
and set the level(s).
Make sure the 01X is set to Internal mode (press the 
[INTERNAL] button so that it lights).  Also, set the 
[MONITOR A/B] switch to monitor the 01X sound.  (In 
the default condition, the button lamp should be off.)  
For details on setting up the 01X for recording, see 
page 68.

In Cubase SX, enable the inputs you intend to use.
From the Devices menu, select “VST Inputs,” and 
click on the “power” buttons for the appropriate 
inputs. Refer to the section “Setting input levels and 
viewing the meters” on page 46, for details on setting 
the input level to avoid distortion.

Set up Cubase SX for recording an audio track.
Use an existing audio track in the song or create a 
new audio track if necessary.

Enable the desired input for the track.
Click on the Input box at the top of the channel fader 
and select the desired channel from the pop-up 
menu.

Also, set the desired output bus.  If you are using the 
same output scheme as the simple one described on 
page 69, set this (or keep it set) to Bus 1.

For optimum ease in monitoring the input signal dur-
ing recording and playback, set the Internal/DAW 
Monitor balance on the 01X to equal (63/63). 

To do this, simultaneously hold down the [MONITOR 
A/B] and press knob 5.  (This sets the MONITOR A 
setting.)  Then during recording and playback, press 
the [MONITOR A/B] button so that MONITOR A is 
active (the lamp lights).

Select the track to be recorded and record as usual 
from Cubase SX.
After recording, play back the song/track.  If you’ve 
made the proper setting in step #5 above, you should 
be able to hear the new track without having to 
change the Monitor setting for the track.