Yamaha digital mixing studio 01x User Manual

01X   Owner’s Manual

MIDI     [UTILITY] → Channel knob 6

u

1 – 8

Determines the Studio Manager ID.  This number must match the Console 
Device ID of the Studio Manager (page 9) when transferring the data.

No

t

TX CH
(Transmit Channel)
1 – 16

Determines the MIDI Transmit channel for transmitting MIDI (program 
change) messages.  

No

87

y

RX CH
(Receive Channel)
1 – 16

Determines the MIDI Receive channel for receiving MIDI (program change) 
messages.  

No

87

b

TX ON/OFF
(Transmit On/Off)

Enables (ON) or disables (OFF) transmission of Program Change messages 
from the 01X. (Also see “Program Change Assign Table” below.)

No

87

n

RX ON/OFF
(Receive On/Off)

Enables (ON) or disables (OFF) reception of Program Change messages on 
the 01X from an external device. (Also see “Program Change Assign Table” 
below.)

No

87

m

OMNI ON/OFF

Determines whether program change messages are received over all MIDI 
channels or not. (Also see “Program Change Assign Table” below.)

No

87

w

PGM (Program Change 
Number)
1 – 128

This determines the assignment of program change number to Scene number.  
In other words, it allows you to specify which MIDI program change number 
(sent via an external device) selects which Scene on the 01X.  When a Scene is 
recalled on the 01X, the Program Change number assigned to that Scene is 
transmitted.  Program change messages are sent and received over mLAN Port 
5.

• Make sure to set the SHIFT + REMOTE function to “NO ASSIGN” when 

transmitting/receiving program change data.

• Scenes 01 – 99 are assigned by default to program change numbers 1 – 99 

in order, and Scene 00 (initial setting) is assigned to program change num-
ber 100.

• These program change/Scene number assignments can be stored to exter-

nal devices (such as a computer) by using the included Studio Manager 
software.

• When the same Scene is assigned to more than one program change num-

ber, the lowest program change number takes precedence.

No

87

r

SCENE 
(Scene Number)
NO ASSIGN/00 – 99

No

87

,

INIT (Initialize)

Initializes or resets the Scene/Program Change assignments to their default 
values.

Yes