Yamaha dvd-s661bl User Manual

Be sure to turn off this unit and unplug the 
power cable before you make or change 
connections.
• Depending on the component you want to 

connect, there are various ways to make 
connections. Possible connections are 
described below.

• Refer to the manuals supplied with your 

other components as necessary to make the 
best connections.

• Do not connect this unit via your VCR. The 

video quality could be distorted by the copy 
protection system.

• Do not connect the audio out jack of this unit 

to the phono in jack of your audio system.

This unit has a digital coaxial output jack. 
Connect the DIGITAL OUT - COAXIAL jack 
of this unit to your AV receiver equipped with 
a Dolby Digital, DTS, or MPEG decoder 
using a commercially available coaxial cable.

• You need to set [DIGITAL OUTPUT] to [ALL] 

• If the audio format of the digital output does not 

match the capabilities of your receiver, the 
receiver produces a distorted sound or no sound 
at all. Make sure to select the appropriate audio 
format from the menu screen on the disc. 
Pressing AUDIO on the remote control once or 
more may change not only the audio languages 
but also the audio format. The selected format 
appears in the front panel display for several 
seconds.

• If you want to enjoy Dolby Digital, DTS and 

MPEG formats, you must connect this unit to an 
AV receiver that supports these formats.

This unit has 2-ch analog output jacks. 
Connect the AUDIO OUT (L, R) jacks of this 
unit to the corresponding input jacks of your 
audio component (such as a stereo amplifier) 
using the supplied audio pin cable.

C

C

L

R

L

R

R

L