Yamaha dvd-s661bl User Manual

Page of 46
12 
En
Getting Started
1
Open the battery compartment.
2
Insert the two supplied batteries (AAA, 
R03, UM-4) following the indications 
(+/–) inside the compartment.
3
Close the cover.
• Insert batteries correctly according to the polarity 
markings (+/–). Batteries inserted in the opposite 
orientation may leak. 
• Replace the exhausted batteries immediately with 
new ones to prevent leakage.
• Remove the batteries from the compartment if the 
remote control is not used for more than a month.
• If the batteries have leaked, dispose of them 
immediately. Avoid touching the leaked material 
or letting it come into contact with clothing, etc. 
Clean the battery compartment thoroughly before 
installing new batteries.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as 
alkaline and manganese batteries) together. Read 
the packaging carefully as these different types of 
batteries may have the same shape and color.
• Dispose of the batteries correctly in accordance 
with your local regulations.
Using the remote control
Use the remote control within 6 m 
(approximately 20 ft) of this unit and point it 
toward the remote control sensor.
• Do not spill water or other liquids on the remote 
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the 
following types of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a 
heater or stove
– places of extremely low temperature
– dusty places
• When the remote control works unstably, point it 
at an angle upward to the sensor.
1
Plug the power cable into the AC outlet.
2
Turn on your TV and AV receiver.
3
Select the appropriate input source of the 
AV receiver (refer to the manual supplied 
with your AV receiver).
4
Press STANDBY/ON on the front panel or 
 on the remote control to turn on this 
unit.
➜ The front panel display lights up.
5
Set the TV to the correct video input (refer 
to the manual supplied with your TV).
➜ The default screen appears on the TV.
Step 1: Inserting batteries into 
the remote control
Notes
2
1
3
2
Notes
Step 2: Turning on the power
Within 6 m
(approximately 20 ft)
Getting Started