Yamaha elb01e1 User Manual
ELB-01 Owner’s Manual
41
Voice Controls and Effects
3
To call up the Voice Condition display:
Choose a Voice on the panel, then press the same button on the panel again. The Voice
Condition display appears.
Condition display appears.
Each voice group’s Voice Condition (except for Lead Voice) is consists of five display
pages. Voice Condition of the Lead Voice consists of six pages.
pages. Voice Condition of the Lead Voice consists of six pages.
1
Selecting from the Voice Condition display
Voice Condition Display
Setting and adjusting the parameters
You can change the items or parameters when the arrow indicator “¿(÷)” in the
display is flashing. Press the [A] – [D] buttons corresponding to the items or
parameters you want to change to make the indicator flash, then use the DATA
CONTROL dial to select the desired control setting.
With the indicator flashing, you can also directly change the items or parameters by
using the DATA CONTROL dial. For details, see “Using the LCD display” on
page 17.
display is flashing. Press the [A] – [D] buttons corresponding to the items or
parameters you want to change to make the indicator flash, then use the DATA
CONTROL dial to select the desired control setting.
With the indicator flashing, you can also directly change the items or parameters by
using the DATA CONTROL dial. For details, see “Using the LCD display” on
page 17.
VOL.¿24 REV.÷20 ¨1⁄
TOUCH¿ 8 FEET÷PRESET
TOUCH¿ 8 FEET÷PRESET
Currently selected page
NOTE
After pressing one of the [A]
– [D] buttons (to make the
indicator flash), you can
continue pressing the same
button to change the item or
parameter.
– [D] buttons (to make the
indicator flash), you can
continue pressing the same
button to change the item or
parameter.