Yamaha elb01e1 User Manual

ELB-01 Owner’s Manual

48

Voice Controls and Effects

3

The Reverb, Sustain and Rotary Speaker displays are called up by pressing the 
respective buttons on the panel.

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Reverb adds an echo-like effect to the sound, giving the impression of a performance in 
a large room or concert hall. You can adjust the reverb volume for each Voice section or 
the entire system. Also, you can adjust the reverb volume for rhythm and 
accompaniment separately.
Call up the Reverb display to set the Reverb effect by pressing the [REVERB] button 
on the panel.

Each press of the [REVERB] button toggles between On and Off. When set to On, the 
lamp of the button lights up to indicate that Reverb is on.

Selects the Reverb Type. 
Press the [C] button to make the “¿” indicator flash, then use the DATA CONTROL 
dial to change the setting.

Determines the depth of reverberation or the level of the reflected sounds. This allows 
fine control over the depth. When this parameter is set to the minimum, the settings in 
Voice Condition display, Page 2 (page 43) have no effect.
Press the [B] button to make the “÷” indicator flash, then use the DATA CONTROL 
dial to change the setting.

0 - 24

Determines the reverb length for each of the Voice sections. 
Higher settings result in a longer reverb sound.
Press the [D] button to make the “÷” indicator flash, then use the DATA CONTROL 
dial to change the setting.

0.3s – 30.0s

2

<REVERB>    DEPTH÷ 0
¿XG HALL 1  TIM÷ 2.1