Yamaha elb01e1 User Manual
ELB-01 Owner’s Manual
54
Voice Controls and Effects
3
ROTARY SPEAKER
This popular effect (used mainly for electronic organ
sounds) recreates the rich, animated pulsing sound of
a rotating speaker horn.
sounds) recreates the rich, animated pulsing sound of
a rotating speaker horn.
DISTORTION
This effect adds distortion to the sound.
WAH
This uses an automatic up/down filter sweep to
change the timbre of the sound, producing a “wah-
wah” sound.
change the timbre of the sound, producing a “wah-
wah” sound.
Parameter
Range
Description
LFO Freq.
0.00 – 39.7 Hz
Determines the tremolo speed.
AM Depth
0 – 127
Determines the amount of volume
change.
change.
PM Depth
0 – 127
Determines the amount of pitch
change in the sound.
change in the sound.
Input Mode
Mono/Stereo
Determines the input
configuration.
configuration.
LFO Depth
0 – 127
Determines the depth of the
Tremolo effect.
Tremolo effect.
L/R Depth
0 – 127
Determines the depth of panning
between the left and right
channels.
between the left and right
channels.
F/R Depth
0 – 127
Front/rear. Determines the depth
of the front and rear panning
effect. This controls both level
and pitch at the same time.
of the front and rear panning
effect. This controls both level
and pitch at the same time.
No.
Type
08
AUTO PAN
09
XG AT PAN
10
EP AUTO PAN
Parameter
Value
Description
LFO Freq.
0.00 – 39.7 Hz
Determines the frequency of the
Auto Pan effect, or how fast the
sound shifts between the left and
right channels.
Auto Pan effect, or how fast the
sound shifts between the left and
right channels.
L/R Depth
0 – 127
Determines the depth of the left/
right panning effect.
right panning effect.
F/R Depth
0 – 127
Determines the depth of the front/
rear panning effect. This controls
both level and pitch at the same
time.
rear panning effect. This controls
both level and pitch at the same
time.
Pan
L<->R
L->R
L<-R
Lturn
Rturn
L/R
L->R
L<-R
Lturn
Rturn
L/R
Determines the Auto Pan type.
(“L<->R” is a sine wave and “L/R”
is a sawtooth wave.)
(“L<->R” is a sine wave and “L/R”
is a sawtooth wave.)
No.
Type
01
XG ROTARY SP
02
ROTARY SP 1
03
ROTARY SP 2
04
ROTARY SP 3
05
ROTARY SP 4
Parameter
Value
Description
EQ LowFreq.
32 – 2.0k Hz
Determines the central frequency
of the low frequency range that is
boosted or cut.
of the low frequency range that is
boosted or cut.
EQ Low Gain
-12 – +12 dB
Determines the amount over
which the low frequency range is
boosted or cut.
which the low frequency range is
boosted or cut.
EQ Hi.Freq.
500 – 16k Hz
Determines the central frequency
of the high frequency range that
is boosted or cut.
of the high frequency range that
is boosted or cut.
EQ Hi.Gain
-12 – +12 dB
Determines the amount over
which the high frequency range is
boosted or cut.
which the high frequency range is
boosted or cut.
No.
Type
01
DIST HARD
02
DIST SOFT
03
OVERDRIVE
04
XG DIST
05
XG AMP SIM
Parameter
Value
Description
Drive
0 – 127
Determines the amount or degree
of distortion in the sound.
of distortion in the sound.
Amp. Type
Off
Stack
Combo
Tube
Stack
Combo
Tube
Determines the type of amplifier
that is simulated.
that is simulated.
LPF Cutoff
1.0 – 18k Hz
Thru
Thru
Determines the cutoff frequency
of the low pass filter. Frequencies
above this value are cut or filtered
out.
of the low pass filter. Frequencies
above this value are cut or filtered
out.
OutputLevel
0 – 127
Determines the level or volume of
the processed sound.
the processed sound.
EQ Low Gain
-12 – +12 dB
Determines the amount of EQ
boost or cut in the low frequency
range.
boost or cut in the low frequency
range.
EQ Mid.Gain
-12 – +12 dB
Determines the amount of EQ
boost or cut in the mid frequency
range.
boost or cut in the mid frequency
range.
Dry/Wet
D63>W – D<W63
Determines the balance of the
original sound and the effect
sound.
original sound and the effect
sound.
No.
Type
01
AUTO WAH
02
XG AUTO WAH
03
TOUCH WAH 1
04
TOUCH WAH 2
05
CLAVI TC WAH
06
EP TOUCH WAH
Parameter
Value
Description
LFO Freq.
0.00 – 39.7 Hz
Determines the speed of the Wah
effect.
effect.
LFO Depth
0 – 127
Determines the depth of the Wah
effect.
effect.
Cutoff
0 – 127
Determines the central frequency
that the wah filter acts upon.
that the wah filter acts upon.
Resonance
1.0 – 12.0
Determines the frequency
bandwidth (around the central
frequency set in Cutoff above)
that the wah filter affects.
bandwidth (around the central
frequency set in Cutoff above)
that the wah filter affects.
Parameter
Value
Description