Yamaha elb01e3 User Manual
ELB-01 Assembly Instructions
2
Mount the Sideboards onto the Pedalboard
unit.
unit.
Be sure not to confuse the Right and Left
Sideboards.
Sideboards.
3-1
Raise the Pedalboard as shown in the illustration
below.
below.
3-2
Position each screw hole on both the Pedalboard
and Sideboards as shown in the illustration and
mount the Sideboards onto the Pedalboard using
the 4 short screws (2 screws on each Sideboard).
and Sideboards as shown in the illustration and
mount the Sideboards onto the Pedalboard using
the 4 short screws (2 screws on each Sideboard).
3-3
Stand the Pedalboard after securing the screws.
Mount the Speaker Unit onto the Sideboards.
4-1
Remove the Grill Net from the Speaker Unit.
4-2
With the help of another person, hold the Speaker
unit horizontally, and slide it from the rear into
place along the brackets.
unit horizontally, and slide it from the rear into
place along the brackets.
Take care not to drop the Speaker unit or to pinch your
finger(s) between the Speaker unit and Sideboard.
finger(s) between the Speaker unit and Sideboard.
4-3
While holding the Sideboard(s) to the Speaker
unit, fasten the four short screws from the rear, to
secure the Speaker unit to the Sideboards. Cover
the four screw holes on the rear side with the
corresponding screw caps.
unit, fasten the four short screws from the rear, to
secure the Speaker unit to the Sideboards. Cover
the four screw holes on the rear side with the
corresponding screw caps.
Mount the Main Unit.
5-1
As shown in the illustration, hold the Main unit
horizontally (with two people), and place it on the
front side of the Speaker unit so that the arm at the
bottom of the Main unit comes in front of the
Sideboards, then slide it to the rear side.
horizontally (with two people), and place it on the
front side of the Speaker unit so that the arm at the
bottom of the Main unit comes in front of the
Sideboards, then slide it to the rear side.
Take care not to drop the Main unit or to pinch your
finger(s) between the Speaker unit and Main unit.
finger(s) between the Speaker unit and Main unit.
3
Push the Sideboard
toward the Pedalboard
toward the Pedalboard
Short/black screws
4
Screw caps
Screw caps
Short screws
Push the Sideboard
toward the Speaker unit
toward the Speaker unit
Push the Sideboard
toward the Speaker unit
toward the Speaker unit
Short
screws
screws
5
1. Place down so that
the arm comes in
front of the Sideboard
the arm comes in
front of the Sideboard
Arm
2. Slide to the rear side