Yamaha gf12-12 User Manual

 

Front and rear panel

 

■

 

This section individually controls the output sig-
nal of GROUP buses 1–4. The signal that passes 
through the GROUP 1–4 output channels can be 
sent individually from the GROUP OUT 1–4 
output jacks (page 20, 

 

D

 

 in the connector sec-

tion), and can also be sent to the ST bus or PFL/
AFL bus by using the TO ST switch (group sec-
tion 

 

2

 

) and AFL switch (group section 

 

4

 

).

 

1

 

This knob adjusts the left/right position when 
sending the signal of each GROUP bus 1–4 to the 
ST bus.

 

2

TO ST switch
This switch sends the signal of each GROUP bus 
1–4 to the ST bus. When the switch is on, the sig-
nal that has passed through the PAN control (1) 
will be sent to the ST bus.

3

Group fader
This adjusts the output level of each GROUP bus 
1–4. The position of the group fader will affect all 
signals that are sent from the GROUP bus to the 
GROUP OUT jacks, ST bus, and PFL/AFL bus.

4

AFL (after-fader listen) switch
This switch sends the signal of the GROUP bus to 
the PFL/AFL bus. If this switch is on, the after-
fader signal of the GROUP bus can be monitored 
in the C-R OUT jacks or the PHONES jack.

1

2

3

4

PFL/AFL

L R

GROUP

ST

R

L

4

3

2

1

TO ST

AFL

Same as  GROUP OUT 1-2

GROUP OUT 3-4:

to Meter

GROUP OUT 1

PAN

TO ST

AFL

to Meter

GROUP OUT 2

PAN