Yamaha htr-5890 User Manual

Press l / h to display the detailed information about individual warnings.

• If the ERROR or WARNING screens appears, check the cause of the problem, then perform the auto setup procedure again.
• If warning W-1, W-4 or W-5 appears, corrections are made, but they may not be optimal.
• If warning W-2 or W-3 appears, no corrections are made.
• If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.

W-1:OUT OF PHASE

Speaker polarity is not correct. This message 
may appear depending on the speakers even 
when the speakers are connected correctly.

• Check the speaker connections for proper polarity 

(+ or –).

W-2:OVER 24m 
(80ft)

The distance between the speaker and the 
listening position is over 24 m (80 ft).

• Bring the speaker closer to the listening position.

W-3:LEVEL ERROR

The difference of volume level among speakers 
is excessive. (No level correction is made.)

• Readjust the speaker installation so that all speakers 

are set in locations with similar conditions.

• Check the speaker connections.
• Use speakers of similar quality.
• Adjust the output volume of the subwoofer.

W-4:SWFR PHASE

The phase polarity of the subwoofer is not 
correct.

• Select the opposite phase on the subwoofer if the 

subwoofer has a phase switch.

W-5:VOL ERROR

The result may not be correct because the 
volume was changed during the auto setup 
procedure.

• Perform the auto setup procedure again. Do not 

change the volume during the auto setup procedure.

01EN00_HTR5890U.book  Page 30  Thursday, December 23, 2004  12:39 PM