Yamaha htr-5890 User Manual
37
PLAYBACK
BA
S
IC
OPERA
T
ION
■
Enjoying 2-channel software in surround
Signals input from 2-channel sources can also be played
back on multiple channels.
back on multiple channels.
Press STANDARD on the remote control to select
the decoder.
the decoder.
You can select from the following modes depending on
the type of software you are playing and your personal
preference.
the type of software you are playing and your personal
preference.
PRO LOGIC SUR. STANDARD
Standard processing for Dolby Surround sources.
Standard processing for Dolby Surround sources.
PRO LOGIC SUR. ENHANCED
CINEMA DSP enhanced processing for Dolby Surround
sources
CINEMA DSP enhanced processing for Dolby Surround
sources
PRO LOGIC IIx Movie
*
Dolby Pro Logic II/IIx processing for movie software.
PRO LOGIC IIx Music
*
Dolby Pro Logic II/IIx processing for music software.
PRO LOGIC IIx Game
*
Dolby Pro Logic II/IIx processing for game software.
DTS Neo:6 Cinema
DTS processing for movie software.
DTS processing for movie software.
DTS Neo:6 Music
DTS processing for music software.
DTS processing for music software.
*
Use the PLII/PLIIx parameter to select the Pro Logic II or
Pro Logic IIx decoders (see page 85).
The Pro Logic IIx decoder is not available when SURR B L/R SP
is set to “NONE” (see page 56).
is set to “NONE” (see page 56).
■
Listening to high fidelity stereo sound
with PURE DIRECT
with PURE DIRECT
PURE DIRECT bypasses this unit’s decoders and DSP
processors as well as shuts down the video circuitry,
allowing you to enjoy the highest possible sound fidelity
from analog and PCM sources.
processors as well as shuts down the video circuitry,
allowing you to enjoy the highest possible sound fidelity
from analog and PCM sources.
Press PURE DIRECT to activate pure direct.
The button lights up and the front panel display
automatically goes out.
automatically goes out.
y
The front panel display switches on momentarily when an
operation is performed.
operation is performed.
To cancel, press PURE DIRECT again.
The indicator around the front panel button goes out and
the previous settings are restored.
the previous settings are restored.
• To avoid unexpected noise, do not play DTS-encoded CDs in
this mode.
• When a multi-channel signal (Dolby Digital or DTS) is input,
this unit automatically switches to the corresponding analog
input. (When DTS is selected as an input mode, no sound will
be heard.)
input. (When DTS is selected as an input mode, no sound will
be heard.)
• No sound will be output from the subwoofer.
• TONE CONTROL (page 35) and SET MENU (page 53)
• TONE CONTROL (page 35) and SET MENU (page 53)
settings are not effective.
• The following operations are not possible during PURE
DIRECT operation:
– switching the sound field program
– displaying the OSD
– adjusting SET MENU parameters
– all video functions (video conversion etc.)
– switching the sound field program
– displaying the OSD
– adjusting SET MENU parameters
– all video functions (video conversion etc.)
• PURE DIRECT is automatically cancelled whenever this unit is
set to the standby mode.
Note
STANDARD
0
Notes
PURE DIRECT
PURE DIRECT
Front panel
Remote control
or
01EN00_HTR5890U.book Page 37 Thursday, December 23, 2004 12:39 PM