Yamaha htr-5890 User Manual

l

h

k

n

Use to manually adjust any speaker setting or compensate 
for video signal processing delays when using LCD 
monitors or projectors. Most of the SOUND parameters 
are set automatically when you run auto setup (see 
page 26).

■

 A)SPEAKER SET

Use to manually adjust any speaker setting.

y

If you are not satisfied with the bass sounds from your speakers, 
you can change these settings according to your preference.

Set any THX speakers to SMALL (SML).

  CENTER SP

Choices: NONE, 

, LRG 

• Select “NONE” if you do not have a center speaker. 

The unit directs all of the center channel signal to the 
front left and right speakers.

• Select “SML” if you have a small center speaker. The 

unit directs the low-frequency signals of the center 
channel to the speakers selected in LFE/BASS OUT.

• Select “LRG” if you have a large center speaker. The 

unit directs the entire range of the center channel signal 
to the center speaker.

  FRONT SP

Choices: 

, LARGE

• Select “SMALL” if you have small front speakers. The 

unit directs the low-frequency signals of the front 
channel to the speakers selected in LFE/BASS OUT.

• Select “LARGE” if you have large front speakers. The 

unit directs the entire range of the front left and right 
channel signals to the front left and right speakers.

The memory back-up circuit prevents the stored data 
from being lost even if this unit is in the standby mode. 
However, if the power cord is disconnected from the 
AC outlet, or the power supply is cut for more than one 
week, the stored data will be lost. If so, adjust the 
items again.

+10

 

. A)SPEAKERSET

B)SPEAKERLEVEL

C)SPDISTANCE

D)GRAPHICEQ

: Up/Down

p

/p

: Enter

< / >

2 SOUND MENU 1/3

NONE [SML

LRG

CENTER SP

[SMALL

LARGE

FRONT SP

01EN00_HTR5890U.book  Page 55  Thursday, December 23, 2004  12:39 PM