Yamaha HTR-5930 User Manual

■ Audio jacks

This unit has three types of audio jacks (analog audio, 
digital audio coaxial, and digital audio optical). 
Connection depends on the availability of audio jacks on 
your other components.

AUDIO jacks
For conventional analog audio signals transmitted via left 
and right analog audio cables. Connect red plugs to the 
right jacks and white plugs to the left jacks.

DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital 
audio cables.

DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital 
audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and 

DTS bitstreams. When you connect components to both the 
COAXIAL and OPTICAL jacks, priority is given to the signals 
input at the COAXIAL jack. All digital input jacks are 
compatible with 96-kHz sampling digital signals.

• This unit handles digital and analog signals independently. Thus 

audio signals input at the analog jacks are output only at the 
analog AUDIO OUT (REC) jacks.

• Pull out the cap from the optical jack before you connect the 

fiber optic cable. Do not discard the cap. When you are not 
using the optical jack, be sure to put the cap back in place. This 
cap protects the jack from dust.

■ Video jacks

This unit has two types of video jacks (composite video, 
and component video). Connection depends on the 
availability of input jacks on your video monitor.

VIDEO jacks
For conventional composite video signals transmitted via 
composite video cables.

COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y) 
and chrominance (P

B

, P

R

) video signals transmitted on 

separate wires of component video cables.

P

B

Y

P

R

V

R

L

C

O

R

L

(Red)

(White)

(Orange)

(Yellow)

(Green)

(Blue)

(Red)