Yamaha HTR-5930 User Manual

You can use the automatic preset tuning feature to store 
FM stations with strong signals up to 40 (A1 to E8: 8 
preset station numbers in each of the 5 preset station 
groups) of those stations in order. You can then recall any 
preset station easily by selecting the preset station number.

Press INPUT l / h repeatedly so that 
“TUNER” is displayed in the front panel 
display.

Press and hold MEMORY for more than 3 
seconds.
The preset station number as well as the MEMORY 
and AUTO indicators flashes. After approximately 5 
seconds, automatic presetting starts from the current 
frequency and proceeds toward the higher 
frequencies.

When automatic preset tuning is completed, the front 
panel display shows the frequency of the last preset 
station.

y

You can select the preset station group and the preset station 
number where the first received station will be stored by pressing 
A/B/C/D/E on the front panel and then PRESET/TUNING/CH 
l / h.

• Any stored station data existing under a preset station number is 

cleared when you store a new station under the same preset 
station number.

• If the number of received stations does not reach 40 (E8), 

automatic preset tuning automatically stops after searching for 
all the available stations.

• Only FM stations with sufficient signal strength are stored 

automatically by automatic preset tuning. If the station you 
want to store is weak in signal strength, tune into it manually 
and store it as described in “Manual preset tuning” on page 38.

l

h

l      PROGRAM       h

l      INPUT      h

A1:FM 87.5 MHz