Yamaha MCX-2000 User Manual
MCX-2000 Setup Guide
11
1 With Easy Setup, you can quickly and easily configure your desired MusicCAST network just by following the simple on-
screen instructions (page 27). To create a network comprised of an MCX-2000 with clients, specify the options listed
below. When the proper settings have been made, a simple diagram of your system appears in the display.
below. When the proper settings have been made, a simple diagram of your system appears in the display.
Enter the following settings:
• Language: Select a language used for screen messages.
• Date and Time: Set the current date and time.
• System configuration selection: Select “Use the MCX-2000 in conjunction with MCX-A10/C15 clients”.
• Network connection selection: Select “Connect to a network containing MusicCAST components only”.
• Network settings configuration: Select “Automatic configuration”.
• Date and Time: Set the current date and time.
• System configuration selection: Select “Use the MCX-2000 in conjunction with MCX-A10/C15 clients”.
• Network connection selection: Select “Connect to a network containing MusicCAST components only”.
• Network settings configuration: Select “Automatic configuration”.
After you’ve made these settings, a diagram of the specified MusicCAST system (in this case, a MusicCAST-only network
with the MCX-2000 and clients) is shown in the display.
with the MCX-2000 and clients) is shown in the display.
n To select a displayed item, move the highlight on it using the up or down arrow button, and then press the SELECT button. The SELECT button
also lets you alternately select and deselect a radio button. When you specify a value, use the up or down arrow button to display a desired value,
and then press the SELECT button (page 19).
and then press the SELECT button (page 19).
From the next screen, you will need to operate the MCX-2000 and each client to configure the MusicCAST network.
2 Turn on each client as instructed in the on-screen message. If you’re using a network hub for wired clients, you should
turn on the hub at this time. When you’re ready, go to the next screen.
Power
Network hub
MCX-A10