Yamaha MCX-2000 User Manual

MCX-2000 Owner’s Manual

34

Before configuring a MusicCAST network through automatic Client Registration, be sure to connect any wired clients to 
the network hub connected to the MCX-2000. (If you want to integrate your MusicCAST network into an existing PC 
network, connect both the MCX-2000 and wired clients to the PC network hub.)

1 On each client, press the front panel Play button as the Auto Configuration screen is shown. Notice the client display 

shows the following messages in a short period.

2 As soon as the client display shows its ID (CL-XXXXX: a 5-digit unique number to each client), the MCX-2000 will also 

show the same client ID in the registration screen.

n Each client display continues showing “Press STOP to cancel” during the registration process. If you press the Stop button, the registration 

process for that client will be canceled. Normally, you don’t need to operate clients after you pressed the Play button in step 2.

3 When the MCX-2000 found all clients, open the Submenu (Fix) in the registration screen. Select OK from the menu. 

The MCX-2000 shows “Saving...” and registers the clients it found. Each client display shows “Complete!” for a second.

Now that the MCX-2000 and each client recognized and memorized each other, your MusicCAST network is 
successfully created. Go to Applications section (page 46) and enjoy MusicCAST.

n When networked with the MCX-2000 for the first time, your clients must be updated before actual use (page 45).

The client is searching a wireless MusicCAST network...

The client found a MusicCAST network, 
and continues searching an available MusicCAST server...

The client found a MusicCAST server, waiting to be registered...

The wired network icon indicates 
radio signal strength

Clients (ID) found in the process