Yamaha MCX-2000 User Manual
MCX-2000 Owner’s Manual
41
DHCP
Specify ON to automatically get an IP address from the MCX-2000 or a DHCP server (or an equivalent router function) in
your PC network (factory setting), or OFF to manually specify on this client. When you select OFF, you need to specify
appropriate values to the IP Address and Subnet Mask parameters.
your PC network (factory setting), or OFF to manually specify on this client. When you select OFF, you need to specify
appropriate values to the IP Address and Subnet Mask parameters.
When you select either value, the “Please wait.” message is shown. When your setting is stored, you will go back to the
Manual Setup menu.
Manual Setup menu.
IP Address
Specify an IP address within the same network address as the target MCX-2000. This value must be unique and
shouldn’t duplicate the one used for the MCX-2000, other MusicCAST clients or devices in the target PC network.
The specified IP address only works when the DHCP parameter is set to OFF (when this client doesn’t get an IP address
from the MCX-2000 or a DHCP server in your PC network).
shouldn’t duplicate the one used for the MCX-2000, other MusicCAST clients or devices in the target PC network.
The specified IP address only works when the DHCP parameter is set to OFF (when this client doesn’t get an IP address
from the MCX-2000 or a DHCP server in your PC network).
When you have finished, select and determine Save & Network Restart. When the “Please wait.” message is shown and
your setting is stored, you will go back to the Manual Setup menu. If you abort your change, select Cancel or push the
controller stick leftward.
your setting is stored, you will go back to the Manual Setup menu. If you abort your change, select Cancel or push the
controller stick leftward.
Subnet Mask
Specify the same subnet mask value as the target MCX-2000. The specified subnet mask value only works when the
DHCP parameter is set to OFF (when this client doesn’t get an IP address from the MCX-2000 or a DHCP server in your
PC network).
DHCP parameter is set to OFF (when this client doesn’t get an IP address from the MCX-2000 or a DHCP server in your
PC network).
When you have finished, select and determine Save & Network Restart. When the “Please wait.” message is shown and
your setting is stored, you will go back to the Manual Setup menu. If you abort your change, select Cancel or push the
controller stick leftward.
your setting is stored, you will go back to the Manual Setup menu. If you abort your change, select Cancel or push the
controller stick leftward.