Yamaha MCX-2000 User Manual

MCX-2000 Owner’s Manual

72

4 When the image file is created, the MCX-2000 shows the 

following dialog box. To continue the process, open the 
tray and set a CD-R/RW disc for audio recording with 
“Change disc and proceed with recording” selected. 
Select OK in the dialog box.

5 If you set a CD other than one specified, the MCX-2000 

prompts you to set a blank disc. In addition, you cannot 
record onto a CD-R disc that’s already been recorded.

If you set a CD-RW disc that’s already been recorded, the 
MCX-2000 shows the following dialog box, asking your 
answer.

Quick Mode: Select this to quickly erase the current disc 
content and continue the process.

Normal Mode: Select this to completely erase the 
current disc content (which could take a long time) and 
continue the process.

Change Disc: Select this if you want to replace the disc 
with a blank CD-R/RW disc.

Cancel CD duplication: Select this to cancel the process.

Change discs if necessary, using the OPEN/CLOSE button 
on the remote control for tray operations.

6 When the MCX-2000 detects an appropriate blank disc, it 

automatically starts writing the image file on that disc.

.

7 When the CD duplication process is finished, the 

MCX-2000 shows the following dialog box, asking what 
you want to do next.

Open CD screen: Select this to finish the process, and 
open the CD song list screen (page 52) to confirm a list of 
songs on the duplicated CD.

Create another CD-R/RW: Select this if you want to 
duplicate another music CD. The MCX-2000 automatically 
opens the tray and lets you repeat the above procedure from 
step 2.

Exit this screen: Select this to finish the process.

n When you cancel or finish the process, the original disc image file is 

automatically erased.