Yamaha KX25 User Manual

You can restore the factory default settings of the KX. Follow the instructions below to execute Factory Set.

• The edited Arpeggio types and Control Templates will be lost by executing Factory Set. Important data should be 

Press the DATA [INC] button.
“Are you sure?” appears on the display.

Press the DATA [INC] button again to 
execute Factory Set.
After Factory Set has been completed, the 
display called up in step 2 appears.

DAW Select

CubaseAI, Cubase4, 
LogicPro, DigiPerf, 
SONAR

CubaseAI

Determines the DAW software you use on the computer with the 
KX.

ProgChgMode

PC+Remot, ProgChg, 
Remote

PC+Remot

Determines the type of the MIDI message generated by pressing 
the PROGRAM [INC] and [DEC] buttons.

PC+Remot . When this is selected, the Program Change message 

is transmitted via USB-MIDI Port 1 and the Remote 
Control message dedicated to Cubase is transmitted 
via USB-MIDI Port 2.

ProgChg.. When this is selected, only the Program Change 

message is transmitted via USB-MIDI Port 1.

Remote.... When this is selected, only the Remote Control 

message dedicated to Cubase is transmitted via USB-
MIDI Port 2.

MIDI Select

USB, MIDI

USB

Determines which connector is used for MIDI transmit/receive: 
USB TO HOST or MIDI IN/OUT.

USB ......... The USB TO HOST connector is used for MIDI 

communication between the computer and the KX. 
When the MIDI Thru parameter below is set to “MIDI 

→ 

MIDI” or “MIDI 

→ USB” or “USB → MIDI,” MIDI can 

also be transmitted via the MIDI OUT connector (MIDI 
Thru only), even if “USB” is selected here.

MIDI......... Only the MIDI connectors are available for MIDI 

communication.

MIDI Transmit Ch

1–16

1

Determines the MIDI channel over which the KX transmits MIDI 
messages (generated via your keyboard performance).

MIDI In Thru

Off, MIDI

→MIDI, 

MIDI

→USB, USB→MIDI

MIDI

→USB

Determines whether the MIDI messages received via the MIDI IN 
connector will be transmitted via the MIDI OUT connector or USB 
connector.

Device Number

Off, 1–16, All

All

Determines the MIDI Device Number of the KX.

Display Time

Off, 1.0sec, 1.5sec, 
2.0sec, 3.0sec, 4.0sec, 
5.0sec, Hold

1.5sec

Determines the duration (time) for which the value (like the one 
called up by operating the CONTROL knob) is shown temporarily 
on the display.

Octave LED

Normal, Reverse

Normal

Determines the status of OCTAVE LED lamps. When “Normal” is 
selected, the LED lamps work as described on page 27. When 
“Reverse” is selected, the right and left of the LED status are 
reversed.

BulkTransmit

—

—

Transmits all the settings of the KX to the DAW software or 
external MIDI device as bulk data. Press the DATA [INC] button to 
start transmission.

FactorySet

—

—

Restores the factory-programmed system settings of the KX.