Yamaha mfc10 User Manual
20
MIX Mode
STATUS
DATA/CTRL
DATA/CTRL
BANK MSB/MAX
BANK LSB/MIN
TOGGLE ON-OFF
/NUMBER OF PGM
BANK LSB/MIN
TOGGLE ON-OFF
/NUMBER OF PGM
DEC
/NO
/NO
INC
/YES
MEMORY
EDIT
FC
EDIT
WRITE
/EXIT
±
10
Pressing [6]-[0] transmits Function data.
To select the Function number’s 10's digit, press [FUNCTION], and the MIX mode will switch
to the MIX mode’s Function Memory (see page 21). In this state, all foot switches ([0]-[9]) will
transmit Function Memory.
To select the Function number’s 10's digit, press [FUNCTION], and the MIX mode will switch
to the MIX mode’s Function Memory (see page 21). In this state, all foot switches ([0]-[9]) will
transmit Function Memory.
F16
F10
~
■
MIX Mode Memory Control (Transmit) ..............................................
In the MIX mode, a maximum of 25 Program Change memories (independent in this mode) and 5 Function memo-
ries can be stored in memory and later transmitted via MIDI.
• Use the upper level foot switches [6]-[0] to transmit Function data.
• Use the lower level foot switches [1]-[5] to transmit Program Change data.
11
15
~
11
~15, 21~25, 31~35, 41~45, 51~55
Press [1]-[5] to access the 25 (5
x
5) Program Change Memories.
To select the Program Change Memory number’s 10's digit, press [
x
10], next press [1]-[5] to
enter a value of 1-5.
Program Memory data can be edited in the same manner as the Normal mode, press [MEMORY
EDIT] to begin editing.
Program Memory data can be edited in the same manner as the Normal mode, press [MEMORY
EDIT] to begin editing.
• Only 2 digits (10’s digit and 1’s digit) are displayed for
Program Change memory numbers in the MIX mode.