Yamaha mm1402 User Manual
4
■ Master control section
100 400 1k 5k 10k
STEREO GRAPHIC EQUALIZER
00 –20 –15 –10 –6 –3 0 +2 +4 +6
PHANTOM
PFL
TAPE IN
0
10
MONITOR
0
10
PHONES
0
10
TO
MONI
MONI
L
R
AUX SEND 2
0
10
AUX RETURN 2
0
10
AUX SEND 1
0
10
AUX RETURN 1
0
10
STEREO
L
R
10
5
0
5
10
15
20
30
00
+12
9
6
3
0
3
6
9
6
3
0
3
6
9
–12
+12
9
6
3
0
3
6
9
6
3
0
3
6
9
–12
E
F
G
H
I
J
K
L
M
N
O
P
MIXER
E ST L, R master control
These faders adjust the final level of all channels, and
output the combined signal to the ST OUT jacks. The
OUTPUT LEVEL L, R meters allow you to monitor the L
and R outputs.
output the combined signal to the ST OUT jacks. The
OUTPUT LEVEL L, R meters allow you to monitor the L
and R outputs.
F AUX RETURN 1-2 controls
The knobs control the input levels from the effect units
etc. connected to AUX RETURN. Since the signals input
at AUX RETURN pass through this control and are then
output from the ST OUT jacks, AUX RETURN can be
used not only to input the signals from effect units but also
as supplementary inputs.
etc. connected to AUX RETURN. Since the signals input
at AUX RETURN pass through this control and are then
output from the ST OUT jacks, AUX RETURN can be
used not only to input the signals from effect units but also
as supplementary inputs.
AUX RETURN 1,2
L/MONO
AUX RETURN
–10dB
R
1,2
HA
HA
G AUX SEND 1, 2 controls
These knobs adjust the level of the signals that are output
to AUX SEND 1 and 2.
to AUX SEND 1 and 2.
H Graphic equalizer (5 band)
Since this equalizer is placed before ST OUT, it allows
you to make fine adjustments in equalization to the overall
output, for sound field compensation or to prevent
feedback.
you to make fine adjustments in equalization to the overall
output, for sound field compensation or to prevent
feedback.
I PFL indicator
This indicator will light when a PFL switch is turned ON.
J PHANTOM indicator
This indicator will light when the PHANTOM switch is
ON.
ON.
K OUTPUT LEVEL L, R meters
These meters indicate the output level to the ST OUT
jacks.
jacks.
L TAPE input control
This knob controls the input signal of the tape deck etc.
that is connected to the TAPE IN jacks.
that is connected to the TAPE IN jacks.
M TAPE INPUT select switch
This switch selects the destination of the input signal of
the tape deck etc. that is connected to the TAPE IN jacks.
OFF: sent to the stereo bus
ON: sent to MONI OUT (L, R)
the tape deck etc. that is connected to the TAPE IN jacks.
OFF: sent to the stereo bus
ON: sent to MONI OUT (L, R)
N MONITOR control
This knob adjusts the output level from the MONI OUT
jacks.
jacks.
O PHONES control
This knob adjusts the volume of the headphones
connected to the headphone jack.
connected to the headphone jack.